Using the Hardware 4-3
Keyboard
A – Function Keys B – Numeric Key
s
C – Cursor Control Keys D – Windows 95
Keys E – Control Key F – Control Keys
Function keys — Twelve function keys,
F1
through
F12
, are available
on the NEC Versa keyboard. These keys work together with the
Fn
key to activate special functions. Nine keys are preprogrammed with
dual functions, seven of which are printed in blue on the key. For
more information about each function key, see the NEC Versa SX
Quick Reference Card.
Function keys are application-driven. See the specific application's
user guide for information about how each function key works within
the application you are using.
The following function key combinations are preprogrammed for the
NEC Versa SX computer.
Fn-F3
— toggles between three video modes LCD, CRT, or both
(LCD and CRT).
Fn-F4
— sets standby power management mode on. Press any key to
turn off standby mode.
Fn-F6
— sets the internal speaker volume to low, medium, high, or
mute.
To Next Page
Loading...
