Safety Information
2
Caution: Prior to connecting the oscilloscope’s negative
terminal to the +5 volt supply (+) terminal, ensure that
the oscilloscope negative is isolated from the +5 volt
supply ground.
Caution: This device has been designed to provide
resistance to electromagnetic interference. However,
because of the proliferation of radio-frequency
transmitting equipment and other sources of electrical
noise in the health-care environment (for example,
cellular phones, mobile two-way radios, electrical
appliances), it is possible that high levels of such
interference due to close proximity or strength of a
source, may result in disruption of performance of this
device. Disruption may be evidenced by erratic readings,
cessation of operation, or other incorrect functioning. If
this occurs, the site of use should be surveyed to
determine the source of disruption, and actions taken to
eliminate the source. If assistance is required, contact
Nellcor Puritan Bennett’s Technical Services Department
or your local Nellcor Puritan Bennett representative.
Caution: Do not spray, pour, or spill any liquid on the
SRC-MAX, its accessories, connectors, switches, or
openings.
Caution: Do not use the SRC-MAX to test non-O
XIMAX
pulse oximeters or non-O
XIMAX OEM monitors.
Caution: Dispose of batteries in accordance with local
requirements and regulations.
To Next Page
Loading...
Need help?
General
