Printing Offset
The printing offset is the distance between the right edge of the envelope and the imprint.
You can increase the distance by about 5 mm or 10 mm.
How to Set the Default Printing Offset
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 122):
Press and select the path: Default user settings System settings
Print
2. Set the Default from a position list.
3. Press [OK] to validate.
8
Configuring your Mailing System
143
| Page 143 | Nov-04-2015 12:27 |
To Next Page
Loading...
Need help?
General
