Selecting an 'Account Mode'5.4
See also
• Guidelines to Setup an Account on page 76.
How to Display and Change the 'Account Mode'
To display and change the 'Account mode':
1. As supervisor (see How to Log in as Supervisor on page 122):
Press and select the path: Account Management Account Mode
Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2. Select another 'Account mode'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
80
| Page 80 | Nov-04-2015 12:27 |
5
Managing Accounts and Assigning Rights
To Next Page
Loading...
Need help?
General
