Printing [Standard] Mail3.3
In Processing [Standard] Mail Section
This section describes the parameter settings and mail handling sequences for the mailing
processes that use the Type of stamp [Standard], to apply postage using different rates.
See also
• About the use of the Type of stamp, see Choosing a Type of Stamp on page 25.
Applying Postage for [Standard] Mail
Setting Postage for [Standard] Mail
The procedure below outlines steps in a recommended sequence to process your mail.
• As mail requirements quickly vary, some settings may not be necessary, or their
order may vary.
• You must begin with selecting the Type of stamp to gain access to the additional
options and be able to run your mail (standard is default).
Make sure you have already completed the preparation steps
mentioned in Preparing and Starting your Work Session on page
27.
How to Set Postage for [Standard] Mail
Required settings:
1. Make sure you are on the home screen of the [Standard] type of stamp.
The home screen indicates weight, postage amount and the currently selected rate
as illustrated below.
33
| Page 33 | | Nov-04-2015 12:27 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
