LAN Connections
Plugging the right jack in the right socket
Your Mailing System uses a LAN (high speed internet connection) to connect to your
customer Online Services and to a mail accounting software (MAS), located on a separate
PC.
Network/PC LAN (8 wires)
Follow the additional precautions below:
• Avoid using your system during an electrical storm; as there may be a risk of electrical
shock from lightning.
• Do not install LAN connectors in a wet location.
• Disconnect the LAN cable from the wall before moving your system.
Disconnecting your Mailing System
How to Disconnect your Mailing System
1. First switch your Mailing System to OFF mode (see How to Turn the Mailing System
to OFF Mode on page 22).
Only unplug the power cord when the Mailing System is in OFF
mode or Sleep mode to avoid keeping the ink cartridge in an
unprotected position where the ink may dry out and become
unusable.
2. Unplug the power cord from the wall outlet.
3. Unplug the LAN cable from their sockets as they may still be energized.
1
Read this First
9
| Page 9 | Nov-04-2015 12:27 |
To Next Page
Loading...
Need help?
General
