Neopost IN-360 User Manual

2. Check or change the type of stamp.
Press to access the Build stamp screen:
The Type of stamp is indicated on line 2 of the screen.
To change the type of stamp, select the Type line, press [OK] and then select
[Received] from the Type of stamp screen and press [OK].
Additionally, you can:
- Activate or deactivate printing the date.
- Activate or deactivate printing 'Received'.
- Select the option to change and press [OK]. The screen indicates the current
status of the options.
To select an option on the screen: – Highlight the option using the
arrow keys and , – Then always press to validate
your selection.
-
Press or to return to the home screen.
You can also apply this optional setting:
1. Move the stamp away from the envelope edge for thick envelopes: see How to
Move the Stamp (Print Offset) on page 59.
You are now ready to print.
44
| Page 44 | Nov-04-2015 12:27 |
3
Processing Mail

Neopost IN-360 Specifications

General

Brand	Neopost
Model	IN-360
Category	Postal Equipment
Language	English