Need help?Do you have a question about the Neoway N10 and is the answer not in the manual?
Module dimensions, pin package, and key hardware resources/features.
Describes the internal components and their coordination for communication functions.
Lists key technical specifications and parameters of the N10 module.
Details the module's physical specifications and the definition of each pin.
Provides detailed information on the function and electrical characteristics of each pin.
Shows the recommended physical footprint for mounting the N10 module on a PCB.
Details power supply requirements, design considerations, and reference circuits for the module.
Explains the UART interface for AT commands, data communication, and firmware upgrades.
Describes the USB interface for software downloads and connection to a computer.
Covers the DTR pin for sleep mode control and the RING signal for call/SMS alerts.
Details the SIM card interface, supporting embedded or external SIM cards.
Explains the LIGHT pin function as a status LED and its output characteristics.
Describes the audio interface for microphone input and speaker output.
Covers RF design, PCB layout, matching circuits, and connector recommendations.
Details electrical specifications like input/output voltages and currents for various pins.
Specifies the operating and storage temperature ranges for the module.
Lists average current consumption in different operating modes like idle, sleep, and voice/GPRS.
Details ESD protection capabilities for key pins and recommendations for adding protection.
Lists the operating frequency bands (GSM850, EGSM900, DCS1800, PCS1900) for uplink/downlink.
Provides details on transmitting power levels and receiving sensitivity across different bands.
Module dimensions, pin package, and key hardware resources/features.
Describes the internal components and their coordination for communication functions.
Lists key technical specifications and parameters of the N10 module.
Details the module's physical specifications and the definition of each pin.
Provides detailed information on the function and electrical characteristics of each pin.
Shows the recommended physical footprint for mounting the N10 module on a PCB.
Details power supply requirements, design considerations, and reference circuits for the module.
Explains the UART interface for AT commands, data communication, and firmware upgrades.
Describes the USB interface for software downloads and connection to a computer.
Covers the DTR pin for sleep mode control and the RING signal for call/SMS alerts.
Details the SIM card interface, supporting embedded or external SIM cards.
Explains the LIGHT pin function as a status LED and its output characteristics.
Describes the audio interface for microphone input and speaker output.
Covers RF design, PCB layout, matching circuits, and connector recommendations.
Details electrical specifications like input/output voltages and currents for various pins.
Specifies the operating and storage temperature ranges for the module.
Lists average current consumption in different operating modes like idle, sleep, and voice/GPRS.
Details ESD protection capabilities for key pins and recommendations for adding protection.
Lists the operating frequency bands (GSM850, EGSM900, DCS1800, PCS1900) for uplink/downlink.
Provides details on transmitting power levels and receiving sensitivity across different bands.
General| Brand | Neoway |
|---|---|
| Model | N10 |
| Category | Motherboard |
| Language | English |
To Next Page
