N10_Hardware_User_Guide
Copyright © Neoway Technology Co., Ltd.
7 Package
N10 modules are packed in real with sealed bags for delivery to guarantee a long shelf life. Follow same
package of the modules again in case of opened for any reasons.
If exposed to air for more than 48 hours at conditions not worse than 30°C/60% RH, a baking procedure
should be done before SMT. Or, if the indication card shows humidity is greater than 20%, the baking
procedure is also required.
The baking should last for at least 12 hours at 90 °C . Do not bake the modules with the package tray
directly.
To Next Page
Loading...
