NetApp StorageGRID Webscale SG6060 User Manual

Caution: Install hardware from the bottom to the top of the rack or cabinet to prevent the
equipment from tipping over. To ensure that the heaviest equipment is at the bottom of the
cabinet or rack, install the SG6000-CN controller above the E2860 controller shelf.
Attention: If you are installing multiple SG6060 appliances in the same rack, consider
installing all the E2860 controller shelves toward the bottom, and the SG6000-CN controllers
toward the top. Before committing to the installation, verify that the 0.5m optic cables shipped
with the SG6060 appliance, or cables that you supply, are long enough for the planned layout.
Related information
NetApp Hardware Universe
NetApp Interoperability Matrix Tool
Unpacking the boxes
Before installing the StorageGRID Webscale appliance, unpack all boxes and compare the contents
to the items on the packing slip.
SG6000-CN controller
E2860 controller shelf with no drives installed
Two front bezels
Two rail kits with instructions
60 drives (2 SSD and 58 NL-SAS)
Four handles
Preparing for installation | 13

NetApp StorageGRID Webscale SG6060 Specifications

General

Brand	NetApp
Model	StorageGRID Webscale SG6060
Category	Server
Language	English