You need one of the following options:
• One to four TwinAx cables or optical cables
for the 10/25-GbE ports you plan to use on
the SG6000-CN controller
• One to four SFP+ transceivers for the 10/25-
GbE ports if you will use optical cables and
10-GbE link speed
• One to four SFP28 transceivers for the
10/25-GbE ports if you will use optical
cables and 25-GbE link speed
RJ-45 (Cat5/Cat5e/Cat6) Ethernet cables
(four minimum)
Service laptop
Supported web browser
1-GbE (RJ-45) port
Optional tools
Power drill with Phillips head bit
Flashlight
Mechanized lift for E2860 controller shelf
Web browser requirements
You must use a supported web browser.
Web browser
Minimum supported version
Google Chrome 54
Microsoft Internet Explorer 11 (Native Mode)
Mozilla Firefox 50
You should set the browser window to a recommended width.
Browser width
Pixels
Minimum 1024
Optimum 1280
Preparing for installation | 15
To Next Page
Loading...
Need help?
General
