NETGEAR genie BASIC Settings
34
D6300 WiFi DSL Modem Router
ReadySHARE USB Storage and Printer
You can view information about a USB storage device that is connected to the WiFi modem
router’s USB port here.
USB Storage (Basic Settings)
From the BASIC Home screen, select ReadySHARE to display the USB Storage (Basic
Settings) screen:
This screen displays the following when Basic is selected:
• Network/De
vice Name. The default is \\readyshare. This is the name used to access the
USB device connected to the WiFi modem router.
• Available Network Folders. The
folders on the USB device.
Share Name. If only on
e device is connected, the default share name is USB_Storage.
You can click the name shown, or you can type it in the address field of your web browser.
If Not Shared is shown, the default share has been deleted and no other share for the
root folder exists. Click the link to change this setting.
Read Access and
Write Access. Show the permissions and access controls on the
network folder: All – no password (the default) allows all users to access the network
folder. The user name (account name) for All – no password is guest. The password for
admin is the same one that you use to log in to the WiFi modem router. By default, it is
password.
Folder Name. Full p
ath u
sed by the network folder.
Volume Name. Vo
lume name from the storage device (either USB drive or HDD).
Total Space and
Free Space. Show the current utilization of the storage device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
