NETGEAR D6300

NETGEAR genie ADVANCED Home
48
D6300 WiFi DSL Modem Router
• To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The WiFi modem router attempts to add the WPS-capable device. The WPS LED
on
the top of the WiFi modem router blinks green.
When the WiFi modem router establishes
a WPS connection, the LED is solid green, and the WiFi modem router WPS screen
displays a confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select ADVANCED > Setup to display the Setup menu. The following selections are
available:
• Internet Setu
p. This selection is a shortcut to the same Internet Basic Settings screen
that you can access from the dashboard on the BASIC Home screen. See Internet Basic
Settings on page 30.
• ADSL Setup
. Internet (ADSL) se
tup. See ADSL Setup on page 49.
• Wireless Setup. This selection
is a shortcut to the same Wireless Settings screen that
you can access from the dashboard on the BASIC Home screen. See Basic Wireless
Settings on page 37.
• WAN Setup. In
ternet (WAN) setup. See WAN Setup on page 50.
• LAN Setup. Lo
cal area network (LAN) setup. See LAN Setup on page 53.
• QoS Setup. Quality of
Service (QoS) setup. See Quality of Service Setup on page 56.
• Guest Network. This selection
is a shortcut to the same Wireless Settings (for guest
networks) screen that you can access from the dashboard on the BASIC Home screen.
See Guest Networks on page 40
.