NETGEAR Nighthawk M6 Pro User Manual

Travel setup
To set up your mobile hotspot for travel usage, install and fully charge the battery before
turning the device on.
Charge the battery
Your mobile hotspot battery comes partially charged. We recommend that you fully
charge the battery before using your mobile hotspot away from home.
NOTE: For the fastest possible charging, use the USB power adapter and cable
included with your mobile hotspot. Third-party USB power adapters and
computer USB ports typically do not provide the same amount of current as the
included USB power adapter and will not charge your battery as quickly.
Third-party cables can also limit battery charging speed.
Figure 6. Nighthawk M6 battery charging
To charge your battery:
1. Connect the USB charging cable to your mobile hotspot.
2. Connect the other end of the charging cable to the USB power adapter.
3. Plug the USB power adapter into a wall outlet.
User Manual13Overview and Setup
Nighthawk M6 Pro, Nighthawk M6

NETGEAR Nighthawk M6 Pro Specifications

General

DSL WAN	No
Ethernet WAN	Yes
3G/4G USB modem compatibility	-
Ethernet LAN (RJ-45) ports	1
Battery capacity	5040 mAh
Power source type	Battery, USB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Ethernet LAN interface type	Ethernet
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 6 GHz)
Top Wi-Fi standard	Wi-Fi 6E (802.11ax)
WLAN data transfer rate (max)	3600 Mbit/s
Cables included	USB Type-C
Antenna connector type	TS9
Product type	Portable router
Product color	Black
4G standard	LTE
4G LTE category	20
Processor model	Qualcomm Snapdragon X65
Processor manufacturer	Qualcomm

Weight and Dimensions

Width	105 mm
Height	21.5 mm
Weight	256 g