Name: NETGEAR Nighthawk M6 Pro
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Your settings are saved.

Configure port filtering from the

web user interface

You can select which applications (for example, HTTP, FTP, email servers) can access

the Internet. Used with other security measures such as a firewall, port filtering can

enhance network security.

To configure port filtering from the web user interface:

1. From the web user interface dashboard, select Settings > Advanced > Port Filtering.

The Port Filtering page displays.

2. Click or tap to select the Enable check box.

The Port Filtering list displays.

3. From the Port Filtering list, select one of the following:

•

Block List. Specific applications and services are not allowed to access the Internet

(block list).

•

Allow List. Only specific applications and services are allowed to access the

Internet (allow list).

Only one list at a time can be active, either a block list or an allow list.

4. Identify the ports to filter.

Enter a meaningful label that describes the application or service.

5. Enter the port being used.

6. Enter the communication protocol being used.

7. Click or tap Save.

Your settings are saved.

Change display settings from the

web user interface

You can change your mobile hotspot's display settings from the web user interface.

Lowering the LCD screen’s brightness level or reducing the screen time-out to a shorter

User Manual74Access the web user interface

Nighthawk M6 Pro, Nighthawk M6

Other manuals for NETGEAR Nighthawk M6 Pro

Questions and Answers:

Need help?

Do you have a question about the NETGEAR Nighthawk M6 Pro and is the answer not in the manual?

General