NETGEAR Nighthawk M6 Pro User Manual

To power off or restart your mobile hotspot:
1. Hold down the Power button for 5 seconds.
The Shut down/Restart menu appears and you are prompted to power off or restart
the device.
2. Tap Shut down to power off the device, or tap Restart to restart the device.
Manage your mobile hotspot with
NETGEAR Insight Pro
You can manage your mobile hotspot with NETGEAR Insight Pro. Insight Pro is a
cloud-based management platform that allows you to remotely manage, deploy, and
configure enterprise mobile hotspot devices with complete visibility. Device profiles
can be configured and centrally applied to large quantities of devices simultaneously,
with any profile configuration changes propagated to all devices that are assigned that
profile. Additionally, mobile hotspots can be monitored individually, and access can be
enabled or disabled to specific devices or to all devices that share a profile.
Figure 9. NETGEAR Insight app icon
When a mobile hotspot is running under Insight Pro, the Insight icon is shown in the
dashboard status bar.
For instructions on adding a mobile hotspot to an Insight Pro account, scan the following
QR code or visit https://kb.netgear.com/000063752/.
User Manual18Overview and Setup
Nighthawk M6 Pro, Nighthawk M6

NETGEAR Nighthawk M6 Pro Specifications

General

DSL WAN	No
Ethernet WAN	Yes
3G/4G USB modem compatibility	-
Ethernet LAN (RJ-45) ports	1
Battery capacity	5040 mAh
Power source type	Battery, USB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Ethernet LAN interface type	Ethernet
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 6 GHz)
Top Wi-Fi standard	Wi-Fi 6E (802.11ax)
WLAN data transfer rate (max)	3600 Mbit/s
Cables included	USB Type-C
Antenna connector type	TS9
Product type	Portable router
Product color	Black
4G standard	LTE
4G LTE category	20
Processor model	Qualcomm Snapdragon X65
Processor manufacturer	Qualcomm

Weight and Dimensions

Width	105 mm
Height	21.5 mm
Weight	256 g