EasyManuals Logo

NETGEAR Nighthawk M6 Pro User Manual

NETGEAR Nighthawk M6 Pro
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
To enable Plugged-In Mode for fixed usage:
1. Remove the mobile hotspot back cover by lifting the corners.
2. Remove the battery.
NOTE: When using Plugged-In Mode, we recommend that you do not
reinstall the back cover after removing the battery for better device cooling
performance.
3. Connect the USB charging cable to your mobile hotspot.
4. Connect the other end of the charging cable to the USB power adapter.
5. Plug the USB power adapter into a wall outlet.
Power on your hotspot and finish
setup
After configuring your mobile hotspot for travel or fixed usage, power on the device to
complete the setup process.
NOTE: When idle, the touch screen goes dark to save power. Quickly press and
release the Power button to wake the screen.
To power on your hotspot and finish setup:
1. Press and hold the Power button for two seconds.
The NETGEAR logo displays and your mobile hotspot starts up.
The welcome screen displays.
2. Tap Let's go.
3. Follow the onscreen instructions to set up a unique WiFi network name, WiFi
password, and admin password.
Customizing your WiFi settings helps to protect your mobile hotspot’s WiFi network.
NOTE: If you don't customize your the settings, your device uses the WiFi
network name, WiFi password, and admin password printed on the label
underneath the battery.
4. Tap Got it.
The You're all set! screen displays to confirm your configuration.
5. Tap Go to my dashboard.
The home screen displays.
Your mobile hotspot is set up.
User Manual16Overview and Setup
Nighthawk M6 Pro, Nighthawk M6

Table of Contents

Other manuals for NETGEAR Nighthawk M6 Pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk M6 Pro and is the answer not in the manual?

NETGEAR Nighthawk M6 Pro Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
3G/4G USB modem compatibility-
Ethernet LAN (RJ-45) ports1
Battery capacity5040 mAh
Power source typeBattery, USB
Ethernet LAN data rates10, 100, 1000, 2500 Mbit/s
Ethernet LAN interface typeEthernet
Wi-Fi bandTri-band (2.4 GHz / 5 GHz / 6 GHz)
Top Wi-Fi standardWi-Fi 6E (802.11ax)
WLAN data transfer rate (max)3600 Mbit/s
Cables includedUSB Type-C
Antenna connector typeTS9
Product typePortable router
Product colorBlack
4G standardLTE
4G LTE category20
Processor modelQualcomm Snapdragon X65
Processor manufacturerQualcomm
Weight and Dimensions IconWeight and Dimensions
Width105 mm
Height21.5 mm
Weight256 g

Related product manuals