NETGEAR Nighthawk M6 Pro User Manual

Enable or disable Guest WiFi from
the web user interface
You can turn on Guest WiFi to share your Internet connection with temporary visitors
on a separate connection from your personal WiFi devices. Guest WiFi is disabled by
default.
To enable or disable Guest WiFi from the web user interface:
1. From the web user interface dashboard, select Settings > General > Guest Network.
The Guest Network page displays.
2. Select the Enable check box to enable Guest WiFi, or clear the check box to disable
Guest WiFi.
3. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
4. Click or tap Continue.
Guest WiFi is enabled.
A QR code for devices to connect with displays on the Guest Network page.
Additional settings also display.
User Manual62Access the web user interface
Nighthawk M6 Pro, Nighthawk M6

NETGEAR Nighthawk M6 Pro Specifications

General

DSL WAN	No
Ethernet WAN	Yes
3G/4G USB modem compatibility	-
Ethernet LAN (RJ-45) ports	1
Battery capacity	5040 mAh
Power source type	Battery, USB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Ethernet LAN interface type	Ethernet
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 6 GHz)
Top Wi-Fi standard	Wi-Fi 6E (802.11ax)
WLAN data transfer rate (max)	3600 Mbit/s
Cables included	USB Type-C
Antenna connector type	TS9
Product type	Portable router
Product color	Black
4G standard	LTE
4G LTE category	20
Processor model	Qualcomm Snapdragon X65
Processor manufacturer	Qualcomm

Weight and Dimensions

Width	105 mm
Height	21.5 mm
Weight	256 g