NETGEAR Nighthawk M6 Pro User Manual

If you changed the SSID or password, your previously connected WiFi devices must
reconnect using the new credentials.
Change WiFi standby, range,
bandwidth, and info display settings
from the web user interface
To change WiFi standby, range, bandwidth, and info display settings from the web
user interface:
1. From the web user interface dashboard, select Settings > General > WiFi Band.
The WiFi Band page displays.
2. Click or tap More.
Additional settings display.
3. Select Global Settings.
The Global Settings page displays.
4. Select a WiFi Standby time period and WiFi Range setting.
5. Select a Bandwidth (channel frequency) option for each WiFi band that your device
supports.
6. To allow the WiFi information to be displayed on your mobile hotspot home screen,
leave the WiFi Info on Home check box selected.
7. To allow Wi-Fi Protected Setup (WPS) connections to your mobile hotspot, leave the
Enable WPS check box selected.
8. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
9. Click or tap Continue.
Your settings are saved.
User Manual61Access the web user interface
Nighthawk M6 Pro, Nighthawk M6

NETGEAR Nighthawk M6 Pro Specifications

General

DSL WAN	No
Ethernet WAN	Yes
3G/4G USB modem compatibility	-
Ethernet LAN (RJ-45) ports	1
Battery capacity	5040 mAh
Power source type	Battery, USB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Ethernet LAN interface type	Ethernet
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 6 GHz)
Top Wi-Fi standard	Wi-Fi 6E (802.11ax)
WLAN data transfer rate (max)	3600 Mbit/s
Cables included	USB Type-C
Antenna connector type	TS9
Product type	Portable router
Product color	Black
4G standard	LTE
4G LTE category	20
Processor model	Qualcomm Snapdragon X65
Processor manufacturer	Qualcomm

Weight and Dimensions

Width	105 mm
Height	21.5 mm
Weight	256 g