NETGEAR ProSafe FVS114 User Manual

Reference Manual for the ProSafe VPN Firewall FVS114
D-10 Preparing Your Network
202-10098-01, April 2005
DHCP Configuration of TCP/IP in Windows 2000
Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
• Verify that the Obtain an IP address
automatically radio button is selected.
• Verify that Obtain DNS server address
automatically radio button is selected.
• Click the OK button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.

NETGEAR ProSafe FVS114 Specifications

General

VPN Support	Yes
Number of Ports	4
Power Supply	12V DC, 1A
VPN tunnels	Up to 5
Protocols	IPSec, PPTP
Port Speed	10/100 Mbps
DoS/DDoS Protection	Yes
URL Filtering	Yes
Weight	1.5 lbs
Firewall features	Stateful Packet Inspection
Firewall Type	Stateful Packet Inspection (SPI)
Interfaces	4 x 10/100 Mbps Ethernet ports, 1 x 10/100 Mbps WAN port