NETGEAR ProSafe FVS114

Reference Manual for the ProSafe VPN Firewall FVS114
Basic Virtual Private Networking 5-31
202-10098-01, April 2005
Figure 5-39: VPN Policies
3.
Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To
reactivate the tunnel, check the Enable box and click Apply.)
Using the VPN Status Page to Deactivate a VPN Tunnel
To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the VPN Firewall.
2. Click VPN Status under VPN to get the VPN Status/Log screen (Figure 5-40).
Figure 5-40: VPN Status/Log screen