NETGEAR ProSafe FVS114 User Manual

Connecting the Firewall to the Internet 3-1
202-10098-01, April 2005
Chapter 3
Connecting the Firewall to the Internet
This chapter describes how to set up the firewall on your LAN, connect to the Internet, perform
basic configuration of your FVS114 ProSafe VPN Firewall using the Setup Wizard, or how to
manually configure your Internet connection.
Follow these instructions to set up your firewall.
Prepare to Install Your FVS114 ProSafe VPN Firewall
• For Cable Modem Service: When you perform the VPN firewall router setup steps be sure to
use the computer you first registered with your cable ISP.
• For DSL Service: You may need information such as the DSL login name/e-mail address and
password in order to complete the VPN firewall router setup.
Before proceeding with the VPN firewall router installation, familiarize yourself with the contents
of the Resource CD (240-10207-01) for ProSafe VPN Firewall, especially this manual and the
animated tutorials for configuring networking on PCs.
First, Connect the FVS114
1. CONNECT THE CABLES BETWEEN THE FVS114, COMPUTER, AND MODEM
a. Turn off your computer.
b. Turn off the cable or DSL broadband modem.

NETGEAR ProSafe FVS114 Specifications

General

Brand	NETGEAR
Model	ProSafe FVS114
Category	Firewall
Language	English