Reference Manual for the ProSafe VPN Firewall FVS114
Preparing Your Network D-21
202-10098-01, April 2005
Restarting the Network
Once you’ve set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the FVS114
VPN Firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your FVS114 VPN Firewall, you are ready to access and
configure the firewall.
To Next Page
Loading...
Need help?
General