Reference Manual for the ProSafe VPN Firewall FVS114
3-8 Connecting the Firewall to the Internet
202-10098-01, April 2005
How to Log On to the FVS114 After
Configuration Settings Have Been Applied
1. Connect to the VPN firewall router by typing http://www.routerlogin.net in the address field
of your browser, then press Enter.
Figure 3-6: Login URL
2.
For security reasons, the firewall has its own user name and password. When prompted, enter
admin for the firewall user name and password for the firewall password, both in lower case
letters. To change the password, see “Changing the Administrator Password” on page 7-8
Note: The firewall user name and password are not the same as any user name or password
you may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 3-7: Login window
To Next Page
Loading...
Need help?
General