NETGEAR Stora User Manual

Premium Features
135
NETGEAR Stora
3. Click the Enable USB Backup Now button.
A screen displays that tells you to connect an external device to the USB port on the front
of your Stora unit.
After you connect the device, a warning notice displays, informing you that you need to
remove any data that you want to keep from the USB device. This is because during the
backup process, all data stored on the device is erased and cannot be recovered.
4. Click Yes to continue.
If you click No, the enable USB device process aborts. This gives you the opportunity to
remove any data from the device that you want to keep and save it elsewhere.
If you click Yes, the Enable USB Backup dialog box displays.

NETGEAR Stora Specifications

General

Storage drive size	3.5 \
Hot-swap drive bays	-
Storage drive capacity	1000 GB
Storage drive interface	Serial ATA II
Storage drives installed	Yes
Installed storage drive type	HDD
Total installed storage capacity	1 TB
Maximum supported storage capacity	2 TB
Number of storage drives installed	1
Number of storage drives supported	2
Flash memory	256 MB
Internal memory	- GB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Minimum system requirements	Microsoft Internet Explorer 6.0+, \\r Netscape Navigator 7.0, \\r Safari 1.22+, \\r Mozilla Firefox 1.03+
Compatible operating systems	Microsoft Windows Vista, XP Home / Pro (SP1 / SP2), Macintosh OS X, Linux
Wi-Fi	No
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black
Type	Storage server
Device class	Home & Home Office
Power supply location	External
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	146 mm
Width	150 mm
Height	175.25 mm
Weight	1360 g