Stora Agent
49
NETGEAR Stora
Connect a Printer
You can connect a USB printer to Stora and have all computers on your home network share
the same printer. In general, any non-multifunction USB printer should work with your Stora.
Note: Multi-function printers are not currently supported.
Optionally, you can use a powered hub to expand the USB port to support a single printer
and multiple USB drives. Currently multiple printers are not supported.
While NETGEAR does not maintain a list of all supported printers, you might find that
searching this database is helpful: http://www.openprinting.org/printers.
To add a printer to a PC:
1. Connect a USB cable from the printer to the Stora or to a USB hub connected to the
Stora.
2. Log in to the Stora.
3. Double-click the Stora Agent icon and select Explore my Stora folders from the menu that
displays.
A window showing your Stora folders displays
.
4. Double-click the Stora printer icon.
The following message displays.
5. Click OK.