EasyManuals Logo

NETGEAR Stora User Manual

NETGEAR Stora
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Stora Hardware
17
NETGEAR Stora
A pop-up window displays asking if you want to use the disk for max capacity or max
protection:
RAID1 maximizes your protection.
JBOD maximizes your capacity.
For more information, see Disk Management on page 107.
WARNING!
Stora formats hard drives differently than a computer does. Do not
swap hard drives between a Stora and a computer or your data
will be lost. See the Stora Hard Disk Compatibility List at
http://support.netgear.com/app/answers/detail/a_id/12109.
Replace a Disk
If a disk fails in your Stora device, you are notified of the failure by e-mail. On the front of the
Stora device, an amber LED might indicate a failed disk. The top LED is disk 1; the bottom
one is disk 2. Take note of the failed disk.
To ensure compatibility, check the Hardware Compatibility list on the NETGEAR support site
for a list of disks qualified to be used in the Stora.
WARNING!
Be sure to power down the unit and unplug the Stora power cord
before adding or removing the disks. Failure to observe this
precaution, or hot-swapping a drive, could render your disks
useless.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Stora and is the answer not in the manual?

NETGEAR Stora Specifications

General IconGeneral
Storage drive size3.5 \
Hot-swap drive bays-
Storage drive capacity1000 GB
Storage drive interfaceSerial ATA II
Storage drives installedYes
Installed storage drive typeHDD
Total installed storage capacity1 TB
Maximum supported storage capacity2 TB
Number of storage drives installed1
Number of storage drives supported2
Flash memory256 MB
Internal memory- GB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Minimum system requirementsMicrosoft Internet Explorer 6.0+, \\r Netscape Navigator 7.0, \\r Safari 1.22+, \\r Mozilla Firefox 1.03+
Compatible operating systemsMicrosoft Windows Vista, XP Home / Pro (SP1 / SP2), Macintosh OS X, Linux
Wi-FiNo
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorBlack
TypeStorage server
Device classHome & Home Office
Power supply locationExternal
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth146 mm
Width150 mm
Height175.25 mm
Weight1360 g

Related product manuals