Manage Your Network
108
Dual Band Wireless VDSL2 + Ethernet Gateway
Use Remote Access
Before you can access the gateway remotely, you must log in to the gateway and set up
remote management. See Set Up Remote Management on page 106.
To use remote access:
1. Launch a web browser on a computer that is not on your home network.
2. T
ype your gateway’s WAN IP address into your browser’s address or location field followed
by a colon (:) and the custom port number
.
For example, if your external address is 134.177.0.123 and you use port number 8080,
enter http://134.177.0.123:8080 in your browser.
Monitor Internet Traffic
To monitor Internet traffic:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
To Next Page
Loading...
