Supplemental Information
123
Dual Band Wireless VDSL2 + Ethernet Gateway
Technical Specifications
The following table describes the technical specifications for the gateway.
Table 4. Technical specifications
Feature Description
Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
Power adapter 240V, 50 Hz, input
12 VDC @ 2.5A output
Dimensions 73.20 x 122.5 x 209.95 mm (2.88 x 4.8 x 8.27 in.)
Weight 1.27 kg (2.8 lb)
Operating temperature 0° to 40°C (32º to 104ºF)
Operating humidity 90% maximum relative humidity, noncondensing
LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
WAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
entry for
Transmission speed in
Table 3 on page 122.
Radio data rates Auto Rate Sensing
Data encoding standards • IEEE 802.1
1 b/g/n 2.4 GHz - 256 QAM support
• IEEE 802.11 a/n/ac 5.0 GHz
Maximum computers per
wireless network
Limited by the amount of wireless network traffic generated by each node
(typically 50–70 nodes)
Operating frequency range 2.412–2.462 GHz
5.15 to 5.35 + 5.47 to 5.60 + 5.65 to 5.85 GHz
802.1
1 security WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode
Wireless
(continued)
RF channel Auto
Operating mode • 2.4 GHz is 1
1n, 300 Mbps
• 5 GHz is 11ac, 1300 Mbps
20/40 MHz coexistence Enabled
Data rate Best
Output power Full
Table 3. Gateway factory default settings (continued)
Feature Default Behavior
To Previous Page
Loading...
