NETGEAR VEVG2610-1FXAUS

Control Internet Access
43
Dual Band Wireless VDSL2 + Ethernet Gateway
Edit an Outbound Firewall Rule
This feature is for advanced administrators only. Incorrect configuration causes serious
problems.
 To edit an outbound rule:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Security > Firewall Rules.
The Firewall Rules screen displays.
The table under Outbound Services lists all existing rules for outbound traffic. If you have
not defined any rules, only the default rule is listed.
The default rule allows all outgoing
traf
fic.
5. Select the radio button for the rule.
6. Click the Edit button.
7. Change the settings.
8. Click the Apply button.
Your settings are saved.
Delete an Outbound Firewall Rule
 To delete an outbound rule:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Security > Firewall Rules.
The Firewall Rules screen displays.