NETGEAR VEVG2610-1FXAUS

Internet Setup
23
Dual Band Wireless VDSL2 + Ethernet Gateway
• Auto Config. This is the default setting.
This setting specifies how the gateway assigns IPv6 addresses to the devices on your
home network (the LAN).
8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be
used for the IPv6 address of the gateway’s LAN interface.
If you do not specify an ID here, the gateway generates one automatically from its MAC
address.
9. Click the Apply button.
Y
our settings are saved.
Use Auto Config for an IPv6 Internet Connection
 To set up an IPv6 Internet connection through auto configuration:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
5. In the
Internet Connection Type list, select Auto Config.
The screen adjusts:
The gateway automatically detects the information in the following fields: