Specify Network Settings
70
Dual Band Wireless VDSL2 + Ethernet Gateway
4. Select Advanced > Setup > LAN Setup.
5. In the Device Name field, type a new name.
6. Click the Apply button.
Your change is saved.
Change the LAN TCP/IP Settings
The gateway is preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The gateway’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.0.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a dif
ferent IP addressing
scheme, you can change these settings.
You might want to change these settings if you need a specific IP subnet that one or more
devices on the network use, or if competing subnets use the same IP scheme.
To change the LAN TCP/IP settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www.routerlogin.com
.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is password.
The user name and
password are case-sensitive.
To Next Page
Loading...
