NETGEAR VEVG2610-1FXAUS

Control Internet Access
45
Dual Band Wireless VDSL2 + Ethernet Gateway
6. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
7. Leave the Port Forwarding radio button selected as the service type.
8. In the Service Name list, select the service name.
If the service that you want to add is not in the list, create a custom service. See Add a
Custom Port Forwarding Service on page 45.
9. Click the Add button.
The service displays in the list.
Add a Custom Port Forwarding Service
 To add a custom service:
1. Find out which port number or range of numbers the application uses.
You can usually find this information by contacting the publisher of the application or user
groups or news groups.
2. Launch a web browser from a computer or wireless device that is connected to the network.
3. T
ype http://routerlogin.net or www.routerlogin.com
.
A login screen displays.
4. Enter the gateway user name and password.
The user name is admin.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering
.
The Port Forwarding/Port Triggering screen displays.
6. Leave the Port Forwarding radio button selected as the service type.