Supplemental Information
122
Dual Band Wireless VDSL2 + Ethernet Gateway
Factory Settings
You can restore the gateway to its factory settings.
To restore factory settings:
Use a paperclip to press and hold the Reset button for at least seven seconds.
The gateway resets and returns to the factory configuration settings shown in the following
table.
Table 3. Gateway factory default settings
Feature Default Behavior
Gateway login User login URL www.routerlogin.net or http://192.168.0.1
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address.
WAN MTU size 1492
Port speed AutoSensing
Local area
network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.02-192.168.0.254
Time zone Greenwich Mean Time (GMT) +10
Time adjusted for daylight saving
time
Disabled
Wireless Wireless communication Enabled
SSID name
Preset. For information, see the product label.
Security
Broadcast SSID Enabled
Transmission speed Auto
Note: Maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput varies.
Network conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead lower actual data
throughput rate.
Country/region Australia
To Next Page
Loading...
