NETGEAR VEVG2610-1FXAUS

Specify Network Settings
69
Dual Band Wireless VDSL2 + Ethernet Gateway
Set Up a Default DMZ Server
 To set up a default DMZ server:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Setup > WAN Setup
.
The WAN Setup screen displays.
5. Select the Default DMZ Server check box.
6. T
ype the IP address.
7. Click the Apply
button.
Your change takes effect.
Change the Gateway’s Device Name
The gateway’s device name is VEVG2610-1FXAUS. This device name displays in a file
manager when you browse your network.
 To change the gateway’s device name:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.