NETGEAR VEVG2610-1FXAUS

Specify Network Settings
80
Dual Band Wireless VDSL2 + Ethernet Gateway
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Wireless
.
The Wireless Settings screen displays.
5. Under Security Options, select a radio button for one of the following WPA options:
• WPA2-PSK [AES]
• WPA-PSK [TKIP} + WPA2-PSK [AES]
• WPA/WPA2 Enterprise
The WP
A2 options use the newest standard for the strongest security, but some older
computers and wireless devices cannot use WPA2. By default, the WP
A-PSK [TKIP] +
WPA2-PSK [AES] radio button is selected so that new or old computers and wireless
devices can connect to the WiFi network by using either WPA2 or WPA security.
The Passphrase field displays.
6. In the Passphrase field, enter the network key (password).
It is a text string from 8 to 63 characters.
7. Write down the new password and keep it in a secure place.
8. Click the Apply
button.
Your changes are saved.
Set Up a WiFi Guest Network
A guest network allows visitors at your home to use the Internet without using your wireless
security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n and
5.0 GHz a/n.
 To set up a guest network:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.