NETGEAR VEVG2610-1FXAUS

Internet Setup
17
Dual Band Wireless VDSL2 + Ethernet Gateway
Use the Internet Setup Wizard
The Internet Setup Wizard detects the type of Internet connection and helps you configure
the gateway.
Note: If your Internet service provider assigned you a static IP address (this
is uncommon), see Manually Specify an Internet Connection Without
a Login on page 18.
 To use the Internet Setup Wizard:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www
.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Setup Wizard.
5. Leave the Yes radio button selected and click the Next button.
6. When prompted, in the Select Country list, select your country.
The Setup Wizard detects the connection type and displays relevant prompts.
7. Click the Test button.
The Setup Wizard checks your Internet connection.
Note: If the gateway does not connect to the Internet, see Chapter 8,
Troubleshooting, for help.
8. After the test succeeds, click the Apply button.
Your settings are saved.