NETGEAR VEVG2610-1FXAUS

Internet Setup
21
Dual Band Wireless VDSL2 + Ethernet Gateway
Otherwise, the default settings are adequate.
6. In the Multiplexing Method list, select LLC-based or VC-based.
7. In the VPI field, type a number from 0 through 255.
The default is 8.
8. In the VCI field, type a number from 32 through 65535.
The default is 35.
9. Click the Apply button.
Your settings are saved.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if genie does not detect it automatically.
 To set up an IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www
.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Advanced Setup > IPv6
.
The Basic Settings screen displays.
5. In the Internet Connection Type list, select the IPv6 connection type:
• If your ISP did not provide details, select
IPv6 Tunnel.
• If you are not sure, select Auto Detect
so that the gateway detects the IPv6 type that
is in use.
• If your Internet connection does not use PPPoe or DHCP
, or not fixed, but is IPv6,
select Auto Config
.
Your Internet service provider (ISP) can provide this information.
6. Click the Apply button.
Your changes take effect.