NETGEAR VEVG2610-1FXAUS

Specify Network Settings
84
Dual Band Wireless VDSL2 + Ethernet Gateway
8. Select the Turn off wireless signal by schedule check box to activate the schedule.
9. Click the Apply button.
Your settings are saved.
Beamforming
Beamforming means that your gateway actively tracks clients and directs WiFi to the client,
rather than just blasting it out in all directions. This means better WiFi range and performance
for your WiFi devices.
The gateway uses explicit and implicit beamforming to improve WiFi performance. Explicit
beamforming requires the client to support beamforming. T
ypically 802.11ac clients support
beamforming. Implicit beamforming means that the gateway can support beamforming even
with clients that do not support beamforming. This gateway supports implicit beamforming for
both 2.4 and 5 GHz clients, which means that it will provide beamforming benefits of better
range and performance for all WiFi devices, even older 802.11a/b/g/n, not just the latest WiFi
clients.
Implicit Beamforming
Implicit beamforming means that the router can use information from client devices that
support beamforming to improve the WiFi signal. This feature is enabled by default, but you
can disable it.
 To disable implicit beamforming:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www
.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Advanced > Advanced Setup > W
ireless Settings.
The Advanced Wireless Settings screen displays.
5. Scroll down below the WPS Settings section and clear the Enable Implicit
BEAMFORMING check box.
6. Click the Apply button.
Your settings are saved.