Hardware Setup
12
Dual Band Wireless VDSL2 + Ethernet Gateway
Use an Ethernet cable to connect the modem to the gateway’s red Ethernet WAN
port.
2. Connect the power adapter to the gateway and plug it into an electrical outlet.
The LEDs light. If the LEDs do not light, press the Power On/Off button on the gateway.
3. Connect a computer to your gateway.
• Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port on the
gateway.
• For a WiFi connection, use the WiFi network name and password on the product
label.
You can log in to the gateway to
view or change its settings. For information about installation,
see the installation guide that came in the package with the product.
To Next Page
Loading...
