Installation and Configuration
27
ProSafe Wireless-N Access Point WNAP210
4. Select the radio button of the security profile you want to modify, and click Edit..
5. In the Network Authentication field, select one of the following:
• WPA2 with Radius
• WPA with Radius
• WPA2 & WPA with Radius
The encryption type displayed in the Data Encryption field is automatically updated based
on your selection in the Network Authentication list.
6. Leave the Wireless Client Security Separation radio button set to No (it is selected by
default). If this feature is enabled, associated wireless clients will not be able to
communicate with each other. This feature is intended for hotspots and other public access
situations.
7. Click Apply to save your settings.
WPA2-PSK, WPA-PSK, or WPA2-PSK & WPA-PSK
Make sure that your wireless clients support the option that you plan to use (WPA2-PSK or
WPA-PSK).
To configure WPA2-PSK, WPA-PSK, or WPA2-PSK & WPA-PSK:
1. Select Configuration > Security > Profile Settings. The profile settings you selected
display.
2. Select the radio button of the security profile you want to modify, and click Edit..
To Next Page
Loading...
Need help?
General
