EasyManuals Logo

Netis WF-2403 User Manual

Netis WF-2403
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Portable Wireless-N Router/AP User Manual
21
3.3.3. Static
Figure 3-17
This item should only be used when users use a static IP address to access Internet, you should
input your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain
name server)” according to the information provided by your ISP. And every IP address should
be input in appropriate IP field, a IP address only divided into four IP octets by sign“.” is
acceptable.
WAN IP address: The IP address that your Internet access into
Subnet mask: Specify a Subnet Mask for your WAN segment
Default gateway: It is provided by your ISP
Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you
with at least one DNS IP address, input IP address of your DNS server in this field
Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
3.3.4. Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is “enable”. If you chose the “Disable” status, the router will become a wired broadband
router without wireless function, so be careful when you choose this status.
Figure 3-18
SSID: SSID (Service Set Identifier) is your wireless network's name shared among all

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Netis WF-2403 and is the answer not in the manual?

Netis WF-2403 Specifications

General IconGeneral
VPN supportPPTP, L2TP, IPSEC
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
USB version2.0
Rack mountingNo
Frequency range2.4 - 2.4835 GHz
USB ports quantity1
DHCP client-
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA-PSK, WPA2-PSK
CertificationFCC, CE
Storage temperature (T-T)-30 - 80 °C
Operating temperature (T-T)-10 - 70 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Product colorWhite
LED indicatorsActivity, Link, Power, WLAN
Cables includedLAN (RJ-45), USB
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals