name “guest” and Password “guest” in the dialog box, click OK.
Figure 4-5
If you can see the picture as below(figure 4-6), that means you have successfully login web
management page of PORTABLE WIRELESS-N ROUTER /AP. You can start configuring
your PORTABLE WIRELESS-N ROUTER /AP now.
Figure 4-6
As you can see, when the device works under client mode, there are 7 items in the web page.
These items have already been described in AP-Router mode, so you can refer to
corresponding item in chapter 3. Please pay attention on chapter 4.2, which will show you
how to connect internet under client mode.
4.2. How to connect internet under client mode
1) Click “Wireless” to open wireless setting page, then click “AP Scan”.
To Next Page
Loading...
