4) After finishing configure PORTABLE WIRELESS-N ROUTER /AP, please return to
your computer to change the IP address. You can use static IP or obtain an IP
automatically.
Figure 4-10
4.3. Status
Please refer to chapter 3.2 .
4.4. WPS Settings
Please refer to chapter 3.4 .
4.5. Network
Please refer to chapter 3.5 .
4.6. DHCP
Note: When the device works under client mode, it acts like a wireless adapter, don’t need to
change this option. Keep its status disable, so your computer could get IP address from other
broadband device.
4.7. System Tools
Please refer to chapter 3.13 .
To Next Page
Loading...
