Figure 5-6
As you can see, when the device works under client mode, there are 7 items in the web page.
These items have already been described in AP-Router mode, so you can refer to
corresponding item in chapter 3.
5.2. Status
Please refer to chapter 3.2 .
5.3. WPS Settings
Please refer to chapter 3.4 .
5.4. Network
Please refer to chapter 3.5 .
5.5. Wireless
Please refer to chapter 3.6 .
5.6. DHCP
Note: When the device works under AP mode, don’t need to change this option. Keep its
status disable, so your computer could get IP address from other broadband device.
To Next Page
Loading...
