WF-2409 User Manual
¾ WPS Configuration: display the encryption information
WPS can connect the wireless adapter and the router in a safe way. If you have a wireless
network card which has WPS button, you may set up a safe network via the following methods
Method 1:
1. Push the WPS button in the Router until the LED is flashing
2. Push the WPS button in the wireless network card until the following window appears
Figure 4-15
3. The next is the safe connection between the adapter and the router, please wait
4. The connect between the adapter and the router is success
Method 2:
1. Push the WPS button in the Router until the LED is flashing
2. Push the ‘Push button Config (PBC)’ in the Wi-Fi protect setup of the adapter until the
following picture appears
Figure 4-16
3. The next is the safe connection between the adapter and the router, please wait
4. The connect between the adapter and the router is success
37
To Next Page
Loading...
Need help?
General
