Continued Page 1.3
1 SAFETY PRECAUTIONS
PAGE
1.2R
Revision: 2 Date Name Signed
Substitute for issue issued 16.06.03 Mangel
of 27.03.97 approved 17.06.03 Denk
text no. 30100
released 17.06.03 Denk
copy to: 95
GB
1.10 Notes on Inspection and Repair
The legal regulations for safety at work,
such as regulations for the workplace, regu-
lations governing dangerous materials, acci-
dent prevention, environmental protection
eg. regulations on disposal and water
balance obligate all commercial business to
protect their employees and / or people and
the environment from adverse effects
caused by contact with dangerous
materials.
Important:
Inspection / repair of machinery and its parts
only takes place when a safety conformity
certificate has been completed by an
authorized and qualified specialist. Please use
a copy and leave the original in the operati-
on and maintenance manual.
Where special safety precautions are neces-
sary in spite of careful emptying and clea-
ning of the machinery, the necessary infor-
mation must be given.
Machinery operating with radio-active media
will only be repaired or inspected by one of
our specialist engineers under the safety of
the owner.
The safety conformity certificate is part of
the inspection / repair service. We reserve
the right to refuse acceptance of this order /
service for other reasons.
To Next Page
Loading...
