NETZSCH NEMO - MAINTENANCE; 7.1 Pumps in General

N
E
M
O
P
U
M
P
E
N
N
E
M
O
P
U
M
P
E
N
7 MAINTENANCE
PAGE
7.0
Date Name Signed Revision: 2
issued 29.10.96 Mangel Substitute for issue
approved 30.10.96 Denk of 18.03.94
released 31.10.96 Hantschk
text no. 30100
copy to: 95
7 Maintenance
7.1 Pumps in General
■ The pumps should be regularly rinsed or cleaned if deposits of medium
are likely to build up (sedimentation).
If the pump needs to be opened to do this, ensure that the pump
and motor are switched off and cannot be turned on accidently
(eg. by removing the fuse).
Periodical standstill to allow for cleaning during operation depends on the
medium and type of operation.
■ The pump can be cleaned:
– through the cleaning ports provided
in the pump housing
– manually by dismantling the pump
– automatically (CIP cleaning) for special
housings with a flushing section
(important instructions for CIP procedures
are given in Section 5 (START UP).
GB