N
E
M
O
P
U
M
P
E
N
N
E
M
O
P
U
M
P
E
N
14 RECOMMENDED STOCK
OF WEAR PARTS
PAGE
14.0
date name signed revision:
issued 24.06.03 Mangel substitute for the issue
approved 25.06.03 Denk dated
released 25.06.03 Denk
text no. 30100
copy to:
14 Recommended Spare Parts
In general, we have all spare parts in stock. Our subsidiaries and exclusive
representatives also hold a certain stock. For special cases and when short
waiting periods are not acceptable, we recommend to keep an amount of
spare parts, corresponding to the pump, in stock on site (please see table
below).
– Rotor
– Stator
– Elastomer parts as O-rings and sleeves
– joint parts
– shaft seals.
To avoid mistakes in delivery, please identify the parts by their position
number shown in the spare parts list or on the sectional drawing.
For placing a spare parts order, it is absolutely necessary to give
the following details:
Pieces - Designation - Identification Number
(see column 2) (see column 3) (see column 4)
The column details are taken from the spare parts list. See example.
GB
Example:
12 3 4
PART Designation
Ident-Number
EURO POS. Quantity Unit Size – Norm – Material/Surface
3410 0005 1,000 pc bearing housing 850221
2910 0010 1,000 pc distance sleeve 850220
3520 0015 1,000 pc bearing cover 850222
SPARE PARTS LIST 10.05.94 10:50:18 Page: 1 / 5