Date Name Signed Revision:
issued 23.06.98 Mangel Substitute for issue
approved 24.06.98 Denk of
released 25.06.98 Denk
text no. 30100
copy to: 95
N
E
M
O
P
U
M
P
E
N
N
E
M
O
P
U
M
P
E
N
3 PACKAGING, TRANSPORTATION, STORAGE
PAGE
3.1
Store room
The environment in which rubber products are being kept must be
cool, dry, free of dust and rather airy, and they must not be stored in
the open, not even in a weather sheltered space.
Rubber products should be kept in surroundings not having less than
minus 10 °C and not more than plus 15 °C.
Store rooms should not be damp, and it must be ensured that there
will be no condensation.
Most favourable is an environment offering a relative humidity under
65 %.
Rubber products must be protected against light, particularly direct
sunlight or artificial light when having a high UV portion.
They should furthermore be kept away from ventilation, especially
draught, by wrapping them up.
As ozone is very aggressive and harmful there should be no store
room used which houses equipment likely to produce ozone, e.g.
electric motors or other equipment which might bring about sparks
or other electrical discharges.
There must be no solvents, oil, grease, lubricants or any chemicals
kept in a store room.
■ Rotor
Please support with wooden blocks and cover up against harm
from mechanical impact.
For rotors of RCC (material number 1.2436):
coat the surfaces with protective grease to avoid rusting.
■ Shaft Sealing by packing gland
Remove the gland and coat the exposed shaft surface
with grease.
■ Pump parts in stainless steel
No grease coating necessary.
■ Other, non-coated pump parts
Protect with grease.
■ Drives
Please observe the drive supplier's instructions.
GB
To Next Page
Loading...
